The Reason of UV Flatbed Machine Printing Process Ink Curing Effect Is Not Good

Meixi UV flatbed printer full models using cold light source UV-LED system curing, longer life, more energy efficient and power saving, printing instant drying, to expand the scope of application of the printer material, full models using the head anti-collision configuration, in order to provide you with better printing help at the same time, to ensure the safety of the print nozzle, reduce your use of UV machines on the nozzle loss. printers use environmentally friendly UV curing ink adapted to Ricoh printheads as standard, and are equipped with a secondary cartridge heating function to ensure fast printing while ensuring that the ink does not solidify, thereby reducing the appearance of printing failures.

UV flatbed machine printing process ink curing effect is not good reason

To prevent direct contact with the nozzle surface. uv flatbed machine nozzle diameter than the hair is also fine, once the fingers, tools and other stains, dust on the surface, inevitably obstruct the nozzle, the formation of ink break problems. Therefore, the usual assumptions found nozzle appearance is relatively dirty, be sure to wipe with a paper towel that does not fall off, so as not to lint and other debris residue.

The Advantages and Disadvantages of Flatbed Printers

Meixi UV flatbed printer, the savings in human capital and the important reduction in labor costs, Meixi UV flatbed machine will traditionally four or five people can complete the printing process, reduced to just one person can all be completed. And the flatbed printer for the operator's technical requirements are not high, so companies in the search for technicians to reduce the difficulty and the pressure to pay wages is not high, thus improving the profits of enterprises. For Meixi UV printer cost analysis, which Meixi UV printer costs are much higher than the cost of flatbed printers, while Meixi UV printer costs in human capital is also much higher than the cost of flatbed printers in human capital.

Tips You Need to Know Before Buying a MEIXI UV Printer

The Meixi MX-2513 UV flatbed printer uses Ricoh G5 printheads, which provide speeds of up to 55 Sqm /hour with four printheads while maintaining print quality, more than twice the speed of similar conventional devices. The printing height is 0~100 mm, equipped with cart anti-collision device to ensure safety and print quality at the same time. Meixi full model supports CMYK, LC, LM+ W+ V. color scheme to provide you with a better UV printer comprehensive solution.

How to Save Ink on UV Flatbed Printers

Meixi UV printer has always been known for environmental protection and energy saving, high efficiency. Print without repeatedly complicated work in the procedural process, do not have to hire too many workers to carry out ink printing printing plate making work, print out the pattern of goods designed to be true, color recovery true, can replace and restore the traditional type of printing process.

The MEIXI UV Printing Machine Works with Magnetic Levitation

Working principle: linear motor is a new type of motor application is increasingly widespread, magnetic levitation train is driven by linear motor. Magnetic levitation train is a new kind of train. General train, due to friction between the wheels and the iron ghost, limiting the speed of the increase, it can reach a high operating speed of no more than 300km / n. Maglev train is a train with magnetic levitation, so that the train and the rail out of contact, in order to reduce friction and improve speed. The train is pulled by a linear motor, one stage of the linear motor is fixed to the ground, extending to a distance with the rail; the other stage is installed on the train, the primary pass to AC, the train moves along the rail.