UV flatbed machine printing process ink curing effect is not good reason

Industrial UV flatbed machine belongs to a large-format printing out equipment, its nozzle precision, the price is not expensive, on the start-up stores is a considerable investment of money, assuming that the usual care is not taken, there will be such and such problems. Then, the user in the daily operation to pay attention to what problems?
　　1. to prevent direct contact with the nozzle surface. uv flatbed machine nozzle diameter than the hair is also fine, once the fingers, tools and other stains, dust on the surface, inevitably obstruct the nozzle, the formation of ink break problems. Therefore, the usual assumptions found nozzle appearance is relatively dirty, be sure to wipe with a paper towel that does not fall off, so as not to lint and other debris residue.
　　2. The correct storage UV flatbed machine nozzle. Usually, we do not recommend storing the nozzle alone, because the external temperature will affect the physical properties of the remaining ink inside the nozzle, such as high temperature will lead to the volatilization of ink solvent, fast solidification, causing nozzle obstruction. Assuming that not timely cleaning, there may be corrosion of internal electronic components, then, the printhead is completely scrapped.
　　3. The correct shutdown. In order to ensure the normal use of flatbed printers, to prevent inconvenience caused by power failure, be sure to install the transformer in the workplace. Before shutting down, the gear should be turned to OFF, the printhead back to the position after blocking the power, after unplugging. Never suddenly block the power supply, which will lead to the printhead can not return to the ink stack in time and exposed to the air, easy to appear ink wither plugging phenomenon.

UV flatbed machine printing pattern solidification speed is relatively fast, mainly relying on the UV lamp sudden reflection of the high heat. However, users may encounter the problem of incomplete curing, how does this happen? How to deal with?
　　1. life has been exhausted. UV lamp also has a certain life, once close to or more than the use of time, the heat intensity of its episodes will be rapidly reduced, can not let the picture a short time completely solidified.
　　2. Voltage instability. Assuming that the rush to the peak period of electricity, it is easy to present the problem of high and low voltage, such frequent fluctuations in the UV flatbed machine into a normal state, therefore, the user must be installed voltage regulator.
　　3. Initial start. Just start the equipment, UV lamp output power has not reached a large value, so it is better to clean the nozzle first in the start, so that all parts into working condition before starting to print.
In addition, the whole machine aging, power supply mismatch and other reasons is also the cause of UV flatbed machine spraying material solidification slow, so the user in the use of information prior to the exclusion, do a good job of routine maintenance, extend the life of the machine to ensure good printing results.

Ningbo Meixi CNC Technology Co., Ltd. is a high-tech enterprise specializing in the research and development, manufacture, sales and service of digital printing equipment.The company’s products are widely used in advertising graphics, printing and packaging, clothing and shoes, furniture, art decoration, construction materials, 3C products and other industries. The products are exported to Europe, America, Southeast Asia, the Middle East and other countries. We aim to become a professional UV printing equipment comprehensive solution manufacturer.